POWER(WATTAGE)8WINPUT VOLTAGE110~220V ACOUTPUT VOLTAGE12V 1AFRENQUENCY50~60HzLED QUANTITY15PCSLED ORIGINPHILIPS-LUMILEDS LUXEON3020 (Philips Authorized)BEAN ANGLE120°LUMINOUS FLUX(LM)1000Lux Min.COLOR RENDERING INDEX(CRI)Ra>80CORRELATED COLOR TEMPERATURE(CCT)3000K / 4000K (from warm white to natural white)BODY MATERIALAluminium Alloy 5052BODY MATERIAL TREATMENTDouble Anodic OxidationTHICKNESS5.5mmFUNCTION(1)Dimmable (2)Touch SwitchCONTROL METHODTouch ControlDIMMING MODE4 Step DimmingBEAN ANGLE120°LIFE SPAN(hrs)50,000 Min.IP WATER-PROOF RATEIP20SIZE(mm)203X121X300mmN.W.0.5KGG.W.0.8KGFeatures:The lamp body is precisely cut from the whole piece of aluminum plate. After several processes such as anodizing, it creates three colors of champagne gold, gray and rose red, which makes Elf always maintain the metallic luster and texture.It is easy to install, which can enhance the use value of the user's products, and does not pose any danger to the human body, so it is an ideal luminare product.Touch switch for stepless dimming. Therefore, it has good reliability and stable performance.Its light source is close to the natural light color, and the light is even and the light is soft and comfortable.It is treated with special electrical insulation and is safe and secure. Modern and colorful curve design makes it stylish and novel.Imported high-power LED with a service life of up to five years. Rugged construction and smooth surface for good illumination and long life.Working principle:The electronic touch type IC is installed inside the desk lamp and the electrode piece at the touch of the desk lamp forms a control loop. When the human body touches the inductive electrode piece, the touch signal is transmitted to the touch sensing end by generating a pulse signal by the pulsating direct current. Then, the touch sensing terminal sends a trigger pulse signal to control the light to be turned on; if touched again, the touch signal is further sent to the touch sensing terminal by the pulsed direct current to generate a pulse signal. At this time, the touch sensing terminal stops sending the trigger pulse signal, and when the alternating current crosses zero, the lamp naturally goes out.Application:This reading light is suitable for bedrooms, study rooms, living rooms, etc.Details